Size guide
A starting point, not a verdict.
These are the garments themselves, measured flat — not body measurements. The difference between the two is the ease, and it is what makes a shirt read relaxed or a blazer read sharp. Graded for Indian body types. All measurements in inches.
Shirts & tops
Cut relaxed — the chest here is the finished shirt, not your body.
| Size | Chest | Waist | Hip | Shoulder | Length |
|---|---|---|---|---|---|
| XS | 40 | 40 | 42 | 15 | 26 |
| S | 42 | 42 | 44 | 15.5 | 26 |
| M | 44 | 44 | 46 | 16 | 26 |
| L | 46 | 46 | 48 | 16.5 | 28 |
| XL | 48 | 48 | 50 | 17 | 28 |
| XXL | 50 | 50 | 52 | 17.5 | 30 |
Vests
The shirt block, sleeveless — an inch narrower across the shoulder, with its own length.
| Size | Chest | Waist | Hip | Shoulder | Length |
|---|---|---|---|---|---|
| XS | 40 | 40 | 42 | 14 | 26 |
| S | 42 | 42 | 44 | 14.5 | 26 |
| M | 44 | 44 | 46 | 15 | 27 |
| L | 46 | 46 | 48 | 15.5 | 27 |
| XL | 48 | 48 | 50 | 16 | 28 |
| XXL | 50 | 50 | 52 | 16.5 | 28 |
Dresses
Cut in three lengths — the piece's own page says which one it is.
| Size | Chest | Waist | Hip | Shoulder |
|---|---|---|---|---|
| XS | 34 | 34 | 36 | 14.5 |
| S | 36 | 36 | 38 | 14.5 |
| M | 38 | 38 | 40 | 15 |
| L | 40 | 40 | 42 | 15.5 |
| XL | 42 | 42 | 44 | 15.5 |
| XXL | 44 | 44 | 46 | 16 |
- Mini length
- 36 in
- Short length
- 40 in
- Long length
- 46 in
Playsuits
Length is shoulder to the hem of the shorts — a little above a mini.
| Size | Chest | Waist | Hip | Shoulder |
|---|---|---|---|---|
| XS | 34 | 34 | 36 | 14.5 |
| S | 36 | 36 | 38 | 14.5 |
| M | 38 | 38 | 40 | 15 |
| L | 40 | 40 | 42 | 15.5 |
| XL | 42 | 42 | 44 | 15.5 |
| XXL | 44 | 44 | 46 | 16 |
- Playsuit length
- 34 in
Co-ord sets — tunic
| Size | Chest | Waist | Hip | Shoulder | Length |
|---|---|---|---|---|---|
| XS | 34 | 32 | 36 | 14.5 | 26 |
| S | 36 | 34 | 38 | 14.5 | 26 |
| M | 38 | 36 | 40 | 15 | 26 |
| L | 40 | 38 | 42 | 15.5 | 28 |
| XL | 42 | 40 | 44 | 15.5 | 28 |
| XXL | 44 | 42 | 46 | 16 | 30 |
Pants
| Size | Waist | Hip | Length |
|---|---|---|---|
| XS | 26 | 38 | 38 |
| S | 28 | 40 | 38 |
| M | 30 | 42 | 38 |
| L | 32 | 44 | 38 |
| XL | 34 | 46 | 38 |
| XXL | 36 | 48 | 38 |
Casual blazer
| Size | Chest | Waist | Hip | Shoulder | Length | Sleeve |
|---|---|---|---|---|---|---|
| XS | 40 | 40 | 42 | 15 | 28.5 | 19.5 |
| S | 42 | 42 | 44 | 15.5 | 29 | 20 |
| M | 44 | 44 | 46 | 16 | 29.5 | 20.5 |
| L | 46 | 46 | 48 | 16.5 | 30 | 21 |
| XL | 48 | 48 | 50 | 17 | 30.5 | 21.5 |
| XXL | 50 | 50 | 52 | 17.5 | 31 | 22 |
Shorts
Half belt, half elastic — the waist gives.
| Size | Waist | Hip | Length |
|---|---|---|---|
| XS | 26 | 38 | 13.5 |
| S | 28 | 40 | 14 |
| M | 30 | 42 | 14.5 |
| L | 32 | 44 | 15 |
| XL | 34 | 46 | 15.25 |
| XXL | 36 | 48 | 15.5 |
How to measure
Over a fitted top, not a jacket. Keep the tape level and snug, with one finger underneath — a tape pulled tight gives a garment that fits like it was pulled tight.
- Shoulder
- Across your back, from the bony tip of one shoulder to the other.
- Bust
- Around the fullest part of your bust, tape level all the way round.
- Waist
- Around the narrowest part, usually just above the navel.
- Hip
- Around the fullest part of your hips and seat, feet together.
- Blazer length
- Shoulder seam down to where you want the blazer to end.
- Vest length
- Shoulder seam straight down the front to where the vest should end. Ours run 26 to 28.
- Tunic length
- Shoulder seam straight down the front to where the tunic should end. Ours run 26 to 30.
- Shirt length
- Shoulder seam straight down the front to where the shirt should end.
- Dress length
- Shoulder seam straight down the front to where the hem should fall. Ours run 36 mini, 40 short, 46 long.
- Playsuit length
- Shoulder seam down the front to the hem of the shorts. Ours are about 34.
- Pant length
- Waist down the outside of the leg to the hem, in the shoes you'll wear.
- Shorts length
- Waist down the outside of the leg to where the shorts should end.
Or skip the chart entirely
Choose Custom on any piece and give us your own measurements as you order. Nothing is cut before you order it, so made-to-measure costs exactly the same as a stock size — it is the same work either way.
